Đăng nhập Đăng ký

bộ sấy sơ bộ Tiếng Anh là gì

phát âm:
"bộ sấy sơ bộ" câu
Bản dịchĐiện thoại
  • Từ điển kỹ thuật
    • preheater
  • bộ     noun Appearance, look, carriage, gait trong bộ đi cũng nhận được...
  • sấy     verb to dry Từ điển kinh doanh desiccate fire máy sấy lửa...
  •      adj cursory paltry, indifferent not intinate, distant ...
  • bộ sấy     Từ điển kỹ thuật dehydrator Giải thích VN: Thiết bị khử hơi nước khỏi...
  • sơ bộ     adj preliminary ...
Câu ví dụ
  • Generally the position of the air preheater at its tail is at its bottom.
    Nói chung, vị trí của bộ sấy sơ bộ không khí ở đuôi của nó nằm ở phía dưới.
  • According to experience, when the air in the preheater rises by 1.5 degrees, the exhaust gas temperature can be reduced by 1 degree.
    Theo kinh nghiệm, khi không khí trong bộ sấy sơ bộ tăng 1,5 độ, nhiệt độ khí thải có thể giảm 1 độ.
  • The purpose of the air preheater at the end of the biomass boiler is to restore the heat of the flue gas.
    Mục đích của bộ sấy sơ bộ không khí ở cuối lò hơi sinh khối là để khôi phục nhiệt của khí thải.
  • Therefore, most of the large capacity units adopt a compact, light weight rotary air preheater.
    Do đó, hầu hết các đơn vị công suất lớn đều áp dụng bộ sấy sơ bộ không khí quay nhỏ gọn, trọng lượng nhẹ.
  • For thermal power plants, the SCR reactor is usually installed between the boiler economizer and the air preheater, because the smoke temperature in this interval is suitable for the reduction of SCR denitrification.
    Đối với các nhà máy nhiệt điện, lò phản ứng SCR thường được lắp đặt giữa bộ tiết kiệm nồi hơi và bộ sấy sơ bộ không khí, bởi vì nhiệt độ khói trong khoảng thời gian này phù hợp để giảm khử nitơ SCR.
  • After installation of the air preheater in the boiler, if the air temperature can be raised by 150-160 degrees by the waste heat, the exhaust gas temperature can be reduced by 110-120 degrees, and the thermal efficiency of the boiler can be increased by 7-7.5E%.
    Sau khi lắp đặt bộ sấy sơ bộ không khí trong lò hơi, nếu nhiệt độ không khí có thể tăng 150-160 độ bởi nhiệt thải, nhiệt độ khí thải có thể giảm 110-120 độ, và hiệu suất nhiệt của lò hơi có thể tăng lên bằng 7-7,5E%.